The unit is inexpensive and works with a little filing because the casting is of very poor quality. The opening between the body and the distribution insert is too small and inconsistent due to the poor casting. (See pictures of the new shiny piece and an older existing piece that works great. Notice the bigger spacing on the older insert.) This causes the gas velocity to be very high, which will cause it to surge and even flame out at higher gas flow rates. I had to file all the flashing off…
DOZYANT High Pressure Propane 0-30 PSI Adjustable Regulator with Gauge/Indicator, with 4 Feet QCC1/Type1 Hose – Fits for Propane Burner Turkey Fryer Smoker and More Appliances
GASPRO 4FT POL High Pressure 0-20PSI Adjustable Propane Regulator Hose with CSA Certified-Fits for Propane Burner Turkey Fryer Smoker and More Appliances-3/8” Flare Flare Nut
B Worden
I thought it was a well crafted grill cover. UPDATE to my review. It has been only 8 months ...
XHome 12 Ft Propane Gas Hose with Low Pressure Regulator for QCC1 LPG Tank and LP Gas Grill, Heater, Fire Pit, Generator and More, 3/8’’ Female Flare Fitting, 11 w.c. – CSA Certified (144 inch)
GAS ONE Propane Burner Two Step/Tier 300,000-BTU High-Pressure Propane Double burner on Wheels & Handle and CSA Listed High Pressure Regulator and Hose for Brewing & Griddles
KIBOW 0~30PSI High Pressure Adjustable Propane Regulator w/8FT SS Braided Hose-Type1 (QCC1) and 3/8 Female Flare Swivel Fitting – WITH GAUGE for Forge/Foundry
Propane Gas Cooker, Single Burner Stove By ANCHEER, 21000-BTU Outdoor Camp Stove with 0-20 PSI High-pressure Regulator, Outdoor Propane Burner with Stand, Patio Stove with Hose (Black Round Upgrade)
Loading...
The unit is inexpensive and works with a little filing because the casting is of very poor quality. The opening between the body and the distribution insert is too small and inconsistent due to the poor casting. (See pictures of the new shiny piece and an older existing piece that works great. Notice the bigger spacing on the older insert.) This causes the gas velocity to be very high, which will cause it to surge and even flame out at higher gas flow rates. I had to file all the flashing off…